Shake well before using. Ready to use. Do not dilute.
Area being treated should be clean and dry.
Spray directly onto a small area, applying a thin layer of refresher oil with a microfiber cloth or mop in the direction of the wood grain, then wipe immediately. Can also be sprayed directly onto the microfiber cloth or mop and applied as described above. If needed, apply a 2nd coat.
To maintain a seamless visual transition between the area being treated with untreated oil finish areas, lightly blend the Oil Refresher where they meet.
The oil sets up quickly so prolonged application is not necessary. Use of a polisher or rotary machine is not necessary and not recommended.
Avoid spraying onto baseboards, walls or other non-flooring surfaces.
Let dry for a minimum of 20 minutes before walking on the floor. Dry time may vary depending on amount of oil applied and interior room temperature. Do not drag heavy furniture across the treated area.
Rinse spray nozzle after use to prevent clogging.
Allow 7-10 days to cure before using any cleaner on the treated area.
WEAR PROTECTIVE GLOVES AND EYE PROTECTION. WASH HANDS AFTER HANDLING.
WARNING: May cause serious eye irritation. Wash hands thoroughly after handling. Wear protective gloves and eye protection with use.
If product gets in eyes, rinse carefully with warm water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists, seek medical advice/attention.